BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Wireless Institute of Australia (WIA)//Events Calendar//EN
TIMEZONE-ID:Australia/Adelaide
X-WR-TIMEZONE:Australia/Adelaide
REFRESH-INTERVAL;VALUE=DURATION:P1D
X-PUBLISHED-TTL:P1D
CALSCALE:GREGORIAN
METHOD:PUBLISH
RSVP:FALSE
BEGIN:VEVENT
UID:20101023T013000-256@wia.org.au
DTSTAMP:20260901T213404Z
ORGANIZER;CN=:MAILTO:
DTSTART:20101022T150000Z
DTEND:20101022T133000Z
SUMMARY:High Altitude Balloon Borne Repeater 
DESCRIPTION:Brief Description: \n\nDetailed Description: Amateur Radio
 Experimenters Group.\nflight of an AR repeater on a high altitude
 balloon\nTo correspond with the WIA National Field Day we will launch a
 balloon borne repeater.\nLAUNCH TIME IS EXPECTED TO BE 01:30 UTC
 (23/10/10).\n
This time the payload will comprise a cross band talk
 through repeater and an APRS beacon.  At apogee the radio horizon will
 be in the order of radius 800km from the balloon position.\n
We are
 especially hoping that field day stations will be able to demonstrate
 this event using internet or RF APRS feeds.\n
Repeater details
 are:\n
Input Freq (you transmit on this)  438.900 MHz  with CTCSS 123 Hz
 (You must use CTCSS tone).\nOutput Freq (you listen on this) 146.450 MHz
  with CTCSS 123 Hz.\n
APRS identification will be VK5ZSN-11.\n
Progress
 of the balloon may be tracked via the internet here
 http://spacenear.us/tracker/  this uses the independent project hours
 telemetry. The balloon may also be tracked using aprs.fi. or other APRS
 server or via RF APRS network.\n
Lots of information about how to decode
 the telemetry packages on the balloon may be found at
 http://projecthorus.org/\n
There will be a net control station  to
 assist with management of the traffic on the balloon repeater VK5ZBR -
 Horus Control. 
END:VEVENT
END:VCALENDAR